Hot Air Dryer Machine , Vacuum Shelf Dryer Machine , 50- 350℃ , Far Infrared

Quick Detail:

1.Most of hot air is circled inside the oven. The heat efficiency is high and the energy source can be saving.
2.Using enhanced ventilation and adjustable air separating boards. It can make materials dried uniformly. The heat source can be steam, heat conductive oil, electricity or far infrared.
3.The machine makes little noise and can be operated stably. The temperature can be controlled automatically and the installation and maintenance are all very convenient.
4.With wide scope of application, it is suitable for drying varieties of materials. So it is a current type of drying equipment.

Description:

RHX series hot air circulation drying oven uses a low noise and high temperature proof axial flow blower and an automatic temperature control system. The whole circulation system is the fully enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efficiency can reach 50%. The successful design of RHX hot air circulation drying oven makes that the hot air circulation drying oven in our country catch the advanced level both at home and abroad. In order to save a large quantity of the energy in out country, in order to enhance the economic results of the enterprises in 1990, the medicine management bureau of the state issued the industry standard and the uniform type is RHX.

1.The heat source can be steam, electricity, far infrared, or steam+electricity. Customer can select one of the heating ways in accordance with practical conditions.
2.Temperature of operation: 50-140℃ for steam, maximum temperature will be 150℃.
1.50-350℃ for electricity or far infrared
2.There are automatic and computer control systems for customer selection.
3.The normal pressure of steam will be 0.02-0.8Mpa (0.2-8kg/cm2).
4.The equipped power of electric heater will be 15kw Calculated with model I and the operational power to be used will be 5-8kw/h.
5.For special requirement, please indicate in order.
6.The price of non-standard oven shall be discussed additionally.
7.If the operation temperature is more than 140℃ or less than 60℃, please indicate it in order.
8.The size of drying trolly and tray is standardized. They can be exchanged each other.
9.The size of drying tray: 460*640*45(mm)

Applications:

It is suitable for heating and solidification, drying and dehydration of raw materials in pharmaceutical industry, chemical industry, foodstuff , industry, agriculture and sideline products, aquatic products products, light industry, heavy industry and so on. The raw materials can be medicine of raw materials, Chinese traditional medicine tablet of drink, immersed electuary, powder, granule, packing bottle, pigment, dyestuff, dehydration vegetable, dried fruit and melons, banger plastic resin, electric elements, drying varnish and so on.

Specifications:

Competitive Advantage:

1. Most of hot air is circled inside the oven. The heat efficiency is high and the energy source can be saving.
2. Using enhanced ventilation and adjustable air separating boards. It can make materials dried uniformly. The heat source can be steam, heat conductive oil, electricity or far infrared.
3. The machine makes little noise and can be operated stably. The temperature can be controlled automatically and the installation and maintenance are all very convenient.
4. With wide scope of application, it is suitable for drying varieties of materials. So it is a current type of drying equipment.

Oven, Dryer

1. what is GLP Machinery mainly for

We, GLP, is mainly for providing room temperature recycle waste tire equipments. with our technology, we can separate the tire into steel wire products, fiber, and rubber granules or rubber powder. which achieved the most economical way of recycling.

2. what kind of technology we are applying

Rubber is difficult to recycle due to the procedure known as “vulcanization,” which it undergoes to attain its springy, flexible nature. Vulcanization is a curing process that involves adding sulfur to rubber, which creates stronger bonds between the rubber polymers. Due to the vulcanization method, tires are difficult to melt for reuse and are therefore typically broken down by a mechanical process.

What we are doing is to R&D new procedures to recycle the rubber tires with economical ways and easy handling methods. With our new procedure, we can recycle the tire under room temperature. no matter car tire, truck tire, even engineering truck tires with diameter of 4000mm.

Initially, whole tires are treated by special equipment which cut or take away of the bead of the tire. And then shred into strips using rugged machines. The shredded material is then placed in grinding machines that use rotors to further shred the material and remove the steel fibers from the tire. Some processors also use powerful magnets to further draw metal from the rubber.

Once the bulk of the steel is removed, the strips are placed into granulators. Depending on the consistency desired by the end user of the shredded tires, the rubber can be milled into assorted sizes of granules that are useful in a number of industries.

While less common, some tires are recycled through a freezing process using liquid nitrogen. After being frozen, the tires are crushed and then milled in a similar process described above.

3. What is the Business Principle of GLP

We sincerely hope establishing long and friendly business relations with clients from all over the world. Our goal is not just providing product, but also providing a complete solution including product design, tooling, fabrication and service for our customers to achieve their upmost satisfaction.

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the best quality at the reasonable price.